InterSource USA, Inc: Refractories, Industrial Insulation

Graphite Foil Standard Sizes

CODE	DENSITY		THICKNESS
07025	43.75 lbs/ft³ (± 4.37)	0.70 g/cm³ (± 0.7)	0.010(± 0.0008)"	0.25(± 0.02) mm
07038	43.75 lbs/ft³ (± 4.37)	0.70 g/cm³ (± 0.7)	0.015(± 0.0008)"	0.38(± 0.02) mm
07050	43.75 lbs/ft³ (± 3.12)	0.70 g/cm³ (± 0.05)	0.020(± 0.0012)"	0.50(± 0.03) mm
07075			0.030(± 0.0012)"	0.75(± 0.03) mm
07080			0.032(± 0.0012)"	0.80(± 0.03) mm
07100			0.040(± 0.0012)"	1.00(± 0.03) mm
07150			0.060(± 0.0012)"	1.50(± 0.05) mm
10020	62.50 lbs/ft³ (± 4.37)	1.00 g/cm³ (± 0.07)	0.080(± 0.0008)"	0.20(± 0.02) mm
10025			0.010(± 0.0008)"	0.25(± 0.02) mm
10036			0.015(± 0.0008)"	0.38(± 0.02) mm
10050	62.50 lbs/ft³ (± 3.12)	1.00 g/cm³ (± 0.05)	0.020(± 0.0012)"	0.50(± 0.03) mm
10075			0.030(± 0.0012)"	0.75(± 0.03) mm
10080			0.032(± 0.0012)"	0.80(± 0.03) mm
10100			0.040(± 0.0012)"	1.00(± 0.03) mm
10150			0.080(± 0.002)"	1.50(± 0.03) mm
11033	68.70 lbs/ft³ (± 4.37)	1.10 g/cm³ (± 0.07)	0.015(± 0.0008)"	0.38(± 0.02) mm
12013	75.00 lbs/ft³ (± 4.37)	1.20 g/cm³ (± 0.07)	0.050(± 0.0008)"	0.13(± 0.02) mm
12020	75.00 lbs/ft³ (± 4.37)	1.20 g/cm³ (± 0.07)	0.080(± 0.0008)"	0.20(± 0.02) mm

WIDTH	LENGTH
20" (+0.08") 40"(0.04") 500mm(+2mm), 1000mm(+1mm)	164"(+8~), 328' (+8") 50m(+200mm),100m(+200mm)

Graphite Foil Product Grades

SIZE	INNER PACKAGE	OUTER PACKAGE
0.02" x 39.40" x 164" 0.50mm x 1.00mm x 50mm	Each roll in a vauum sealed plastic bag within a canon	16 or 12 cartons per wooden crate
0.03" x 39.40" x 164" 0.75mm x 1.00mm x 50mm	Each roll in a vauum sealed plastic bag within a canon	9 cartons per wooden crate
0.04" x 39.40" x 164" 1.00mm x 1.00mm x 50mm	Each roll in a vauum sealed plastic bag within a canon	9 or 6 cartons per wooden crate

Based on order, special sizes and packaging are available

Data are avarage results of test conducted under standard procedures and are subject to variation. Results should not be used for specification purposes.
Note: A material safety data sheet is available upon request.
The information, recommendations and opinions set forth herein are offered solely for your consideration, inquiry and verification, and are not, in part or total, to be construed as constituting a warrant or representation for which we assume legale responsibility. Nothing contained herein is to be interpreted as authorization to practice patented invention without a license.