Intersource USA Home
About Intersource USA
Refratories and Fiber Insulation Products
• Refractories
• Fiber Insualtion
          Fiber Blanket
          Fiber Board
          Fiber Paper
          Fiber Textile
• Graphite
Careers at Intersource USA
Contact Intersource USA
Intersource USA Feedback

  

   TaoFibre® Ceramic Fiber Board - Product Range

Temp.
Rating
Target Density
Board Grade
Product Description
2300°F
16-25#
HP
A high quality surface finish and precise dimensional tolerances make aesthetic quality as well as performance is required.

2600 °F
22-26#

HZ
The addition of clay gives a higher density, MOR, and strength.
Made from a special blend of alumina-silica fibers and zirconia, the boards give high stability at heat up to 2462 °F

     TaoFibre® Ceramic Fiber Board - Typical Product Properties

INDEX
HP GRADE (LD)
HP GRADE (HD)
HZ GRADE
Temperature
2300°F
2300°F
2600°F
Working Temp.
2100°F
2100°F
2462°F
Melting Point
3200°F
3200°F
3300°F
Color
Off White
Off White
Off White
Available Density (kg/m3)
(lbs/ft3)
260-290
16-18
350-400
22-25
360-380
20-22
LOI(% by WT)
6 - 7%
6 - 7%
6 - 7%
Dielectric Strength
25.4 volts/mil
25.4 volts/mil
25.4 volts/mil
Shrinkage (%) 24 Hrsat temp.°F
-3 (2012°F)
-3 (2012°F)
-3 (2462°F)
Thermal Conductivity w/m-k (Btu in./hr/ft²°F)
@ 400 °C (752°F)
@ 800 °C (1472°F)
@ 1000°C(1832°F)
0.085(.589)
0.132 (.915)
0.180 (1.25)
0.085(.659)
0.132 (1.07)
0.180 (1.39)
0.085(.638)
0.132 (.991)
0.180 (1.28)
Tensile (Mpa)
0.5 (psi)
0.5 (psi)
0.5 (psi)

  TaoFibre® Ceramic Fiber Board - Chemical Analysis

Al2O3
47-49
47-49
39-40
SiO2
50-52
50-52
42-45
ZrO2
--
--
15-17
Fe2O3
0.2
0.2
0.2
Na2K2O
<0.5
0.2
0.2
Sizes Available
Thickness
24"x36; 24x48
1/2, 1", 1.5", 2"
24x36"; 24x48"
1/4", 12", 1", 1.5", 2"
24"x36; 24"x48"
1", 1.5", 2"

 
© InterSource USA Inc.
  InterSource USA, Inc.,   25 Kimberly Road, Suite A, East Brunswick, NJ 08816, USA
  Email: info@intersourceusa.com   Tel: 732-257-5002  Toll Free: 800-608-5828   Fax: 732-257-5003 inter
1 1