Intersource USA Home
About Intersource USA
Refratories and Fiber Insulation Products
• Refractories
• Fiber Insualtion
          Fiber Blanket
          Fiber Board
          Fiber Paper
          Fiber Textile
          Silica Blanket
          Silica Cloth
Fiberglass Materials
Millboard
• Graphite
Careers at Intersource USA
Contact Intersource USA
Intersource USA Feedback

    TaoFibre® Spun Ceramic Fiber Blanket Physical Properties

TaoFibre Ceramic Blanket Specs
Commercial Grade Blanket
High-Purity Grade Blanket
Zirconia
Grade Blanket
Color
White
White
White
Maximum Use Limit
1260°C (2300°F)
1260°C (2300°F)
1426°C (2600°F)
Continuous Use Limit
800°C (1472°F)
1100°C (2012°F)
1350°C (2461°F)
Average Fiber Diameter
3 - 4.5 microns
3 - 4.5 microns
3 - 4.5 microns
Average Tensile Strength
4 pcf. density
6 pcf. density
8 pcf. density
5.075 psi
7.250 psi
11.600 psi
5.075 psi
7.250 psi
11.600 psi
5.075 psi
7.250 psi
11.600 psi
Rate of Linear Shrinkage
(24 hrs @ 1000°C)
(24 hrs @ 1100°C)
(24 hrs @1200°C )
(24 hrs @ 1350°C )
4%
-
-
-
-
3%
-
-
-
-
-
3%
Thermal Conductivity w/m-k (Btu in./hr/ft²°F)
4 pcf. density @ 400°C (752°F)
4 pcf. density @ 600°C (1112°F)
4 pcf. density @ 800°C (1472°F)
4 pcf. density @ 1000°C (1832°F)
0.06 (.416)
-
0.11 (.763)
-
0.06 (.416)
-
0.11 (.763)
0.16 (1.11)
-
-
0.11 (.763)
0.16 (1.11)
6 pcf. density @ 400°C (752°F)
6 pcf. density @ 600°C (1112°F)
6 pcf. density @ 800°C (1472°F)
6 pcf. density @ 1000°C (1832°F)
0.076 (.527)
-
0.14 (.971)
-
0.076 (.527)
-
0.14 (.971)
0.20 (1.39)
-
-
0.14 (.971)
0.20 (1.39)
8 pcf. density @ 400°C (752°F)
8 pcf. density @ 600°C (1112°F)
8 pcf. density @ 800°C (1472°F)
8 pcf. density @ 1000°C (1832°F)
0.09 (.624)
-
0.176 (1.22)
-
0.09 (.624)
-
0.176 (1.22)
0.22 (1.53)
-
-
0.176 (1.22)
0.22 (1.53)

  TaoFibre® Spun Ceramic Fiber Blanket Chemical Composition
Chemical Contents
Commercial Grade
High-Purity Grade
Zirconia
Grade
Al2O3
44%
47% - 49%
39% - 40%
SiO2
52%
50-52%
38-45%
ZrO2
-
-
15-17%
Fe2O3
<1.2%
0.2%
0.2%
K2O + Na 2O
<0.5%
0.2%
0.2%


Data are avarage results of test conducted under standard procedures and are subject to variation. Results should not be used for specification purposes.
Note: A material safety data sheet is available upon request.
The information, recommendations and opinions set forth herein are offered solely for your consideration, inquiry and verification, and are not, in part or total, to be construed as constituting a warrant or representation for which we assume legale responsibility. Nothing contained herein is to be interpreted as authorization to practice patented invention without a license.
InterSource USA Inc.
  InterSource USA, Inc.,   25 Kimberly Road, Suite A, East Brunswick, NJ 08816, USA
  Email: info@intersourceusa.com   Tel: 732-257-5002  Toll Free: 800-608-5828   Fax: 732-257-5003
inter
1 1